advancedtca http://www.adlinktech.com/advancedtca/ 1 1-7 atca-n700 specifcations network packet processor npu cavium octeon ii cn6880 processor with 32 cnmips cores @1.2 ghz max flash boot image: dual redundant 8m nor fash memory os storage : dual redundant 2g nand fash memory eight ddr3-1333 240-pin vlp rdimm sockets, up to 128 gb local management processor lmp qoriq p2041 quad-core @ 1.2ghz flash boot image: dual redundant 256kbit eeprom os storage: dual of redundant 8g ssd i/o interfaces ethernet switch bcm56842, non-blocking l2/l3 switch fabric with qos support ethernet dual 10/100/1000base-t base interface channels dual 40gbase-kr4 fabric interface channels quad sfp+ (10g/1g) egress ports rtm 120 gbps total available bandwidth supports : 12 x 10g sfp+ ports (atca-rn710) or 2x 40g qsfp+ and 4x 10g sfp+ (atca-rn720) front panel i/o one usb 2.0 port on front panel 3x rj-45 serial ports: one for lmp or ipmc, two for nps picmg standards advancedtca picmg3.0 r3.0 and picmg3.1 r2.0 option 1, 9, 9-kr software support software development cavium cdk 2.3 and broadcom sdk operating system u-boot boot loader & open linux environment mechanical and environmental form factor picmg 3.0 r3.0 advancedtca dimension 322.25mm x 280mm x 6hp (l x w x h) weight 3.29 kgs operating temp. 0c to 50c storage temp. -40c to 70c humidity 5% to 95%, non-condensing shock 20g peak-to-peak, 11ms duration, non-operating vibration non-operating: 1.88grms, 5-500hz each axis operating: 0.5grms, 5-500hz each axis power consumption 320 w max. w/o tcam, rtm: 25 w max. certifcation fcc, ce, ul, nebs level 3 (design) dual cavium cn6880 40g advancedtca ? packet processing blade features tw o cavium octeon ii cn6880 processors, each with 32 cnmips64 v2 cores eight memory sockets support vlp ddr3-1333 reg/ecc up to 128 gb onboard ethernet switch bcm 56842 provides connectivity to rtm, octeon ii processor and backplane (fabric) with l2 and l3 switch management software dual gbase-t fabric interface channels powerful local management processor - freescale qoriq p2041, quad-core @ 1.2ghz flexible rtm support on 12 x10g sfp+ ports (rtm-rn710) or 2x 40g qsfp+ and 4x 10g sfp+ (rtm2-rn720) ordering information model number description/confguration atca-n700/dcn6880/ m64g dual cavium cn6880 1.2ghz processor blade, ddr3-1333 vlp rdimm 8gb x8 atca-n700/scn6880/ m32g single cavium cn6880 1.2ghz processor blade, ddr3- 1600 vlp rdimm 8gb x4 atca-rn710 rear transition module with 12x sfp + 10gbe i/o connectivity atca-rn720 rear transition module with 4x sfp + 10gbe, 2x 40gbe qsfp+ i/o connectivity
note: all specifcations are subject to change without further notice. npu #1 cavium octeon ii cn6880 f r o n t p a n e l z o n e 1 z o n e 2 base channel nor flash sd flash ipmc smart fusion quad-core p2041 qorlq lmp gbe switch bcm53115m rtm conneector npu #1 com fabric switch bcm 56842 320g 10 gbe x 12 fabric channel 40gbe x 2 z o n e 3 npu #2 cavium octeon ii cn6880 usb0 gbe x 1 gbe x1 10gbe x 4 gbe x 2 10gbe x 4 pci-e(1l) pci-e(2l) pci-e(1l) npu #1 npu #2 fabric switch rgmii rs- 232 gphy boot flash mezzanine interlaken module interlaken-la ddr3-1333 vlp dimm ddr3-1333 vlp dimm ddr3-1333 vlp dimm ddr3-1333 vlp dimm ddr3-1333 vlp dimm ddr3-1066mhz mini-vlp-udimm 4gb nor flash nand flash nand flash nor flash rs- 232 sfp+ x 4 rgmii rgmii rgmii rj45 rj45 rj45 rj45 rj45 ddr3-1333 vlp dimm ddr3-1333 vlp dimm ddr3-1333 vlp dimm front panel led indicators and reset front panel i/o interfaces 1-8 7 2 1 3 4 5 6 9 8 functional diagram mechanical layout top npu-cavium octeon ii cn6880 1.2ghz eight ddr3-1333mhz rdimm sockets bottom npu- cavium octeon ii cn6880 1.2ghz bcm 56842 fabric switch zone3: rtm zone1: ipmi/power zone2: base interface 2x gbe fabric interface 2x 40gbe qoriq p2041 health led active out of service reset 10gbe sfp+ port mgmt port of npus & gbe switch serial console of npus & lmp /ipmc usb embedded computing systems 6u cpci blades advancedtca 6u cpci platforms 3u cpci blades ssds ipc accessories 3u cpci platforms industrial computers
|